Qalvin Legacy1.9

Free Version

Publisher Description

Qalvin Legacy is an application for iPod Touch, iPhone and iPad that enables calibration and advanced diagnostics of Quarq ANT+power meters. Qalvin Legacy is not for use with BLE enabled power meters such as the Quarq DZero.

Version History Updates for DZero power meters. Name changed to Qalvin Legacy. 1.9 05/16/2017 Updated Chainrings Selection behavior for XX1 power meters. 1.6 09/07/2014 Updated for the ANT Message Protocol Rev 5
Re-sends calibration request if not acknowledged
Added the option to view firmware release notes
Added the display of Power Balance in the Info screen
Settings screen: G.A.M mode renamed to to SRM PowerControl with
appropriate trademarking
Added Reset Defaults option to Settings screen
Updated calibration table chainring names to better reflect products
User chainring selections are now stored on the power meter when changed
with the calibration tables
Fixed a bug that prevented entry to the Diagnostics screen
Added low weight warnings to the calibration process
Added additional limits on all slope adjustments
Added dynamic reed and switch counts to the Diagnostics screen
Updated copyrights 1.5.0 07/22/2014 Resolved text display bug. 1.4.1 05/09/2014 * Added full support for iPhone5/iPodTouch5 devices using the lightning adapter.
* Fixed a crash in simulation mode
* Updated copyright 1.4.0 12/13/2013 * Updated to the Wahoo SDK v3.
* Updated the application for iOS 7.
* Updated to follow ANT message protocol rev 5.
* Switched the app Icon to the new quarq Q logo
* Added powermeter # in the header text on the Sensor page.
* Created a dialog for showing powermeter lists and calibration table lists on iOS 7.
* Added the new quarq logo to the Qalvin header.
* Diagnostics option now in main sensor screen.
* Fixed a crash when moving into and out of demo mode.
* GAM now automatically enabled for Qpods on Rev 29 and Mercury's on rev 15 and 19+. Mercury rev 12 is instructed to update firmware.
* The settings screen autozero value switched from autozero_supported to autozero_enabled.
* Updated help screenshots and descriptions to match the latest Qalvin.
* Moved the Slope adjust down the menu below the Settings option on the Sensor Screen
* Fixed a crash when entering the calibration screen due to rendering.
* Updated offset_user to properly display negative values
* Fixed offset_user being not properly updated in the factory zero process for Mercury's on rev 12.
* Removed raw torque from the diagnostics screen
* Added the new Factory Zero ability.
* Added the Qalvin master log.
* Fixed Qalvin not properly detecting bootload-mode powermeters.
* Fixed the Revolutions parameter on the Status screen not updating correctly.
* Added a messaging timeout and resend system for communication with the powermeter that depends on a response.
* The calibration tables may now be updated over the air.
* Fixed stuck-closed reed switches not being correctly reported.
* Updated the bundled Chainring calibration tables.
* Removed armv6 support. 1.3.2 11/05/2013 * Resolved conflict with bluetooth on iPhone4s devices. 1.3.1 11/20/2012 * Qbabel is now used as the ANT+ communication backend.
* Qalvin is now capable of updating supported Wahoo dongles to the latest firmware.
* Drastically faster and more stable Powermeter firmware upgrades.
* Old Wahoo dongle firmware must be updated to upgrade Powermeter firmware.
* Old white Wahoo dongles are again supported but may not upgrade firmware.
* Mercury powermeter torque direction fixed.
* Better slope clamping to acceptable ranges.
* Spider values can no longer show negative.
* Extra details added to diagnostic and calibration emails. 1.3.0 11/12/2012 - Additional power meters may now receive firmware updates

- You may now enter the ID of a bootload-mode power meter to directly connect to it

- Added the independent toggling of torque and cadence directions on supported power meters

- Fixed the loop encountered when canceling an "Enter Power Meter ID" search 1.2.1 09/17/2012 1.2.0
* Added the ability to load Developer Powermeter Firmware for selected users
* Added battery voltage checks before firmware uploading
* Additional reporting for firmware upgrades
* Renamed the Diagnostics screen to System Info
* Renamed Advanced Diagnostics to Diagnostics
* Exchanged the order of System Info and Settings in the main Sensor screen
* "Dual Channel G.A.M" references changed to simply "G.A.M"
* Updated help files to be consistent with 1.2.0 version
* Added a fast bootload check to quickly determine if a power meter can accept firmware upgrades
* All CinQo references changed to simply read "power meter"
* Qalvin now checks the range of acceptable slopes based on power meter type and clamps the range to those values while warning the user
* Fixed the improper cast in Spider serial number issue #123
* Fixed the Cadence RPM drop to 0 issue #99
* Fixed the improper cast in power meter offset returned from ANT+ calibrate issue #98
* Power meter firmware files are now downloaded directly from Quarq and stored locally on the device
* Added custom ANT+ bursting code for consistent power meter firmware upgrades
* Added in legacy support for iOS 3.1.X series devices
* Table views are now larger on iPad devices
* Fixed the bootload hangup on iOS issue #91
* Fixed the empty Advanced Diagnostics issue #90
* Qalvin now uses the new cross platform CinQoSport library for all power meter ANT+ communication (this is a huge change)
* Qalvin now has the ability to bootload and update the firmware on supported power meters
* Qalvin now searches for power meters in bootload mode and, if found, sends them directly to the firmware update
* Calibration tables have been added for quickly recalibrating a power meter when you exchange chainrings 1.2.0 09/07/2012 - fixed dual broadcast mode
- added option to redo the final calibration step
- added an initial no-weight calibration step
- added additional calibration process warning
- updated calibration process help
- display chainring balance as a percentage in calibration results 1.1 07/05/2011 1.0 06/01/2011

About Qalvin Legacy

Qalvin Legacy is a free app for iOS published in the Other list of apps, part of Network & Internet.

The company that develops Qalvin Legacy is SRAM LLC. The latest version released by its developer is 1.9. This app was rated by 3 users of our site and has an average rating of 3.3.

To install Qalvin Legacy on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-13 and was downloaded 183 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Qalvin Legacy as malware if the download link is broken.

How to install Qalvin Legacy on your iOS device:

Click on the Continue To App button on our website. This will redirect you to the App Store.
Once the Qalvin Legacy is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
After Qalvin Legacy is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.

Program Details

General

Publisher

SRAM LLC

Released Date

2026-10-13

Languages

English

System requirements

Operating systems

iOS

Download information

File size

10 bytes

Total downloads

183

Pricing

License model

Free

Price

Version History

Here you can find the changelog of Qalvin Legacy since it was posted on our website on 2016-09-26. The latest version is 1.9 and it was updated on Soft112 on 15 October, 2026. See below the changes in each version:

version 1.9

posted on 2026-10-13

Version History Updates for DZero power meters. Name changed to Qalvin Legacy. 1.9 05/16/2017 Updated Chainrings Selection behavior for XX1 power meters. 1.6 09/07/2014 Updated for the ANT Message Protocol Rev 5
Re-sends calibration request if not acknowledged
Added the option to view firmware release notes
Added the display of Power Balance in the Info screen
Settings screen: G.A.M mode renamed to to SRM PowerControl with
appropriate trademarking
Added Reset Defaults option to Settings screen
Updated calibration table chainring names to better reflect products
User chainring selections are now stored on the power meter when changed
with the calibration tables
Fixed a bug that prevented entry to the Diagnostics screen
Added low weight warnings to the calibration process
Added additional limits on all slope adjustments
Added dynamic reed and switch counts to the Diagnostics screen
Updated copyrights 1.5.0 07/22/2014 Resolved text display bug. 1.4.1 05/09/2014 * Added full support for iPhone5/iPodTouch5 devices using the lightning adapter.
* Fixed a crash in simulation mode
* Updated copyright 1.4.0 12/13/2013 * Updated to the Wahoo SDK v3.
* Updated the application for iOS 7.
* Updated to follow ANT message protocol rev 5.
* Switched the app Icon to the new quarq Q logo
* Added powermeter # in the header text on the Sensor page.
* Created a dialog for showing powermeter lists and calibration table lists on iOS 7.
* Added the new quarq logo to the Qalvin header.
* Diagnostics option now in main sensor screen.
* Fixed a crash when moving into and out of demo mode.
* GAM now automatically enabled for Qpods on Rev 29 and Mercury's on rev 15 and 19+. Mercury rev 12 is instructed to update firmware.
* The settings screen autozero value switched from autozero_supported to autozero_enabled.
* Updated help screenshots and descriptions to match the latest Qalvin.
* Moved the Slope adjust down the menu below the Settings option on the Sensor Screen
* Fixed a crash when entering the calibration screen due to rendering.
* Updated offset_user to properly display negative values
* Fixed offset_user being not properly updated in the factory zero process for Mercury's on rev 12.
* Removed raw torque from the diagnostics screen
* Added the new Factory Zero ability.
* Added the Qalvin master log.
* Fixed Qalvin not properly detecting bootload-mode powermeters.
* Fixed the Revolutions parameter on the Status screen not updating correctly.
* Added a messaging timeout and resend system for communication with the powermeter that depends on a response.
* The calibration tables may now be updated over the air.
* Fixed stuck-closed reed switches not being correctly reported.
* Updated the bundled Chainring calibration tables.
* Removed armv6 support. 1.3.2 11/05/2013 * Resolved conflict with bluetooth on iPhone4s devices. 1.3.1 11/20/2012 * Qbabel is now used as the ANT+ communication backend.
* Qalvin is now capable of updating supported Wahoo dongles to the latest firmware.
* Drastically faster and more stable Powermeter firmware upgrades.
* Old Wahoo dongle firmware must be updated to upgrade Powermeter firmware.
* Old white Wahoo dongles are again supported but may not upgrade firmware.
* Mercury powermeter torque direction fixed.
* Better slope clamping to acceptable ranges.
* Spider values can no longer show negative.
* Extra details added to diagnostic and calibration emails. 1.3.0 11/12/2012 - Additional power meters may now receive firmware updates

- You may now enter the ID of a bootload-mode power meter to directly connect to it

- Added the independent toggling of torque and cadence directions on supported power meters

- Fixed the loop encountered when canceling an "Enter Power Meter ID" search 1.2.1 09/17/2012 1.2.0
* Added the ability to load Developer Powermeter Firmware for selected users
* Added battery voltage checks before firmware uploading
* Additional reporting for firmware upgrades
* Renamed the Diagnostics screen to System Info
* Renamed Advanced Diagnostics to Diagnostics
* Exchanged the order of System Info and Settings in the main Sensor screen
* "Dual Channel G.A.M" references changed to simply "G.A.M"
* Updated help files to be consistent with 1.2.0 version
* Added a fast bootload check to quickly determine if a power meter can accept firmware upgrades
* All CinQo references changed to simply read "power meter"
* Qalvin now checks the range of acceptable slopes based on power meter type and clamps the range to those values while warning the user
* Fixed the improper cast in Spider serial number issue #123
* Fixed the Cadence RPM drop to 0 issue #99
* Fixed the improper cast in power meter offset returned from ANT+ calibrate issue #98
* Power meter firmware files are now downloaded directly from Quarq and stored locally on the device
* Added custom ANT+ bursting code for consistent power meter firmware upgrades
* Added in legacy support for iOS 3.1.X series devices
* Table views are now larger on iPad devices
* Fixed the bootload hangup on iOS issue #91
* Fixed the empty Advanced Diagnostics issue #90
* Qalvin now uses the new cross platform CinQoSport library for all power meter ANT+ communication (this is a huge change)
* Qalvin now has the ability to bootload and update the firmware on supported power meters
* Qalvin now searches for power meters in bootload mode and, if found, sends them directly to the firmware update
* Calibration tables have been added for quickly recalibrating a power meter when you exchange chainrings 1.2.0 09/07/2012 - fixed dual broadcast mode
- added option to redo the final calibration step
- added an initial no-weight calibration step
- added additional calibration process warning
- updated calibration process help
- display chainring balance as a percentage in calibration results 1.1 07/05/2011 1.0 06/01/2011

version 1.9

posted on 2026-09-04

Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.

Updates for DZero power meters. Name changed to Qalvin Legacy. 1.9 05/16/2017 Updated Chainrings Selection behavior for XX1 power meters. 1.6 09/07/2014 Updated for the ANT Message Protocol Rev 5
Re-sends calibration request if not acknowledged
Added the option to view firmware release notes
Added the display of Power Balance in the Info screen
Settings screen: G.A.M mode renamed to to SRM PowerControl with
appropriate trademarking
Added Reset Defaults option to Settings screen
Updated calibration table chainring names to better reflect products
User chainring selections are now stored on the power meter when changed
with the calibration tables
Fixed a bug that prevented entry to the Diagnostics screen
Added low weight warnings to the calibration process
Added additional limits on all slope adjustments
Added dynamic reed and switch counts to the Diagnostics screen
Updated copyrights 1.5.0 07/22/2014 Resolved text display bug. 1.4.1 05/09/2014 * Added full support for iPhone5/iPodTouch5 devices using the lightning adapter.
* Fixed a crash in simulation mode
* Updated copyright 1.4.0 12/13/2013 * Updated to the Wahoo SDK v3.
* Updated the application for iOS 7.
* Updated to follow ANT message protocol rev 5.
* Switched the app Icon to the new quarq Q logo
* Added powermeter # in the header text on the Sensor page.
* Created a dialog for showing powermeter lists and calibration table lists on iOS 7.
* Added the new quarq logo to the Qalvin header.
* Diagnostics option now in main sensor screen.
* Fixed a crash when moving into and out of demo mode.
* GAM now automatically enabled for Qpods on Rev 29 and Mercury's on rev 15 and 19+. Mercury rev 12 is instructed to update firmware.
* The settings screen autozero value switched from autozero_supported to autozero_enabled.
* Updated help screenshots and descriptions to match the latest Qalvin.
* Moved the Slope adjust down the menu below the Settings option on the Sensor Screen
* Fixed a crash when entering the calibration screen due to rendering.
* Updated offset_user to properly display negative values
* Fixed offset_user being not properly updated in the factory zero process for Mercury's on rev 12.
* Removed raw torque from the diagnostics screen
* Added the new Factory Zero ability.
* Added the Qalvin master log.
* Fixed Qalvin not properly detecting bootload-mode powermeters.
* Fixed the Revolutions parameter on the Status screen not updating correctly.
* Added a messaging timeout and resend system for communication with the powermeter that depends on a response.
* The calibration tables may now be updated over the air.
* Fixed stuck-closed reed switches not being correctly reported.
* Updated the bundled Chainring calibration tables.
* Removed armv6 support. 1.3.2 11/05/2013 * Resolved conflict with bluetooth on iPhone4s devices. 1.3.1 11/20/2012 * Qbabel is now used as the ANT+ communication backend.
* Qalvin is now capable of updating supported Wahoo dongles to the latest firmware.
* Drastically faster and more stable Powermeter firmware upgrades.
* Old Wahoo dongle firmware must be updated to upgrade Powermeter firmware.
* Old white Wahoo dongles are again supported but may not upgrade firmware.
* Mercury powermeter torque direction fixed.
* Better slope clamping to acceptable ranges.
* Spider values can no longer show negative.
* Extra details added to diagnostic and calibration emails. 1.3.0 11/12/2012 - Additional power meters may now receive firmware updates

- You may now enter the ID of a bootload-mode power meter to directly connect to it

- Added the independent toggling of torque and cadence directions on supported power meters

- Fixed the loop encountered when canceling an "Enter Power Meter ID" search 1.2.1 09/17/2012 1.2.0
* Added the ability to load Developer Powermeter Firmware for selected users
* Added battery voltage checks before firmware uploading
* Additional reporting for firmware upgrades
* Renamed the Diagnostics screen to System Info
* Renamed Advanced Diagnostics to Diagnostics
* Exchanged the order of System Info and Settings in the main Sensor screen
* "Dual Channel G.A.M" references changed to simply "G.A.M"
* Updated help files to be consistent with 1.2.0 version
* Added a fast bootload check to quickly determine if a power meter can accept firmware upgrades
* All CinQo references changed to simply read "power meter"
* Qalvin now checks the range of acceptable slopes based on power meter type and clamps the range to those values while warning the user
* Fixed the improper cast in Spider serial number issue #123
* Fixed the Cadence RPM drop to 0 issue #99
* Fixed the improper cast in power meter offset returned from ANT+ calibrate issue #98
* Power meter firmware files are now downloaded directly from Quarq and stored locally on the device
* Added custom ANT+ bursting code for consistent power meter firmware upgrades
* Added in legacy support for iOS 3.1.X series devices
* Table views are now larger on iPad devices
* Fixed the bootload hangup on iOS issue #91
* Fixed the empty Advanced Diagnostics issue #90
* Qalvin now uses the new cross platform CinQoSport library for all power meter ANT+ communication (this is a huge change)
* Qalvin now has the ability to bootload and update the firmware on supported power meters
* Qalvin now searches for power meters in bootload mode and, if found, sends them directly to the firmware update
* Calibration tables have been added for quickly recalibrating a power meter when you exchange chainrings 1.2.0 09/07/2012 - fixed dual broadcast mode
- added option to redo the final calibration step
- added an initial no-weight calibration step
- added additional calibration process warning
- updated calibration process help
- display chainring balance as a percentage in calibration results 1.1 07/05/2011 1.0 06/01/2011

version 1.9

posted on 2026-08-22

Version History This update from Apple will improve the functionality of this app. No new features are included.

Updates for DZero power meters. Name changed to Qalvin Legacy. 1.9 05/16/2017 Updated Chainrings Selection behavior for XX1 power meters. 1.6 09/07/2014 Updated for the ANT Message Protocol Rev 5
Re-sends calibration request if not acknowledged
Added the option to view firmware release notes
Added the display of Power Balance in the Info screen
Settings screen: G.A.M mode renamed to to SRM PowerControl with
appropriate trademarking
Added Reset Defaults option to Settings screen
Updated calibration table chainring names to better reflect products
User chainring selections are now stored on the power meter when changed
with the calibration tables
Fixed a bug that prevented entry to the Diagnostics screen
Added low weight warnings to the calibration process
Added additional limits on all slope adjustments
Added dynamic reed and switch counts to the Diagnostics screen
Updated copyrights 1.5.0 07/22/2014 Resolved text display bug. 1.4.1 05/09/2014 * Added full support for iPhone5/iPodTouch5 devices using the lightning adapter.
* Fixed a crash in simulation mode
* Updated copyright 1.4.0 12/13/2013 * Updated to the Wahoo SDK v3.
* Updated the application for iOS 7.
* Updated to follow ANT message protocol rev 5.
* Switched the app Icon to the new quarq Q logo
* Added powermeter # in the header text on the Sensor page.
* Created a dialog for showing powermeter lists and calibration table lists on iOS 7.
* Added the new quarq logo to the Qalvin header.
* Diagnostics option now in main sensor screen.
* Fixed a crash when moving into and out of demo mode.
* GAM now automatically enabled for Qpods on Rev 29 and Mercury's on rev 15 and 19+. Mercury rev 12 is instructed to update firmware.
* The settings screen autozero value switched from autozero_supported to autozero_enabled.
* Updated help screenshots and descriptions to match the latest Qalvin.
* Moved the Slope adjust down the menu below the Settings option on the Sensor Screen
* Fixed a crash when entering the calibration screen due to rendering.
* Updated offset_user to properly display negative values
* Fixed offset_user being not properly updated in the factory zero process for Mercury's on rev 12.
* Removed raw torque from the diagnostics screen
* Added the new Factory Zero ability.
* Added the Qalvin master log.
* Fixed Qalvin not properly detecting bootload-mode powermeters.
* Fixed the Revolutions parameter on the Status screen not updating correctly.
* Added a messaging timeout and resend system for communication with the powermeter that depends on a response.
* The calibration tables may now be updated over the air.
* Fixed stuck-closed reed switches not being correctly reported.
* Updated the bundled Chainring calibration tables.
* Removed armv6 support. 1.3.2 11/05/2013 * Resolved conflict with bluetooth on iPhone4s devices. 1.3.1 11/20/2012 * Qbabel is now used as the ANT+ communication backend.
* Qalvin is now capable of updating supported Wahoo dongles to the latest firmware.
* Drastically faster and more stable Powermeter firmware upgrades.
* Old Wahoo dongle firmware must be updated to upgrade Powermeter firmware.
* Old white Wahoo dongles are again supported but may not upgrade firmware.
* Mercury powermeter torque direction fixed.
* Better slope clamping to acceptable ranges.
* Spider values can no longer show negative.
* Extra details added to diagnostic and calibration emails. 1.3.0 11/12/2012 - Additional power meters may now receive firmware updates

- You may now enter the ID of a bootload-mode power meter to directly connect to it

- Added the independent toggling of torque and cadence directions on supported power meters

- Fixed the loop encountered when canceling an "Enter Power Meter ID" search 1.2.1 09/17/2012 1.2.0
* Added the ability to load Developer Powermeter Firmware for selected users
* Added battery voltage checks before firmware uploading
* Additional reporting for firmware upgrades
* Renamed the Diagnostics screen to System Info
* Renamed Advanced Diagnostics to Diagnostics
* Exchanged the order of System Info and Settings in the main Sensor screen
* "Dual Channel G.A.M" references changed to simply "G.A.M"
* Updated help files to be consistent with 1.2.0 version
* Added a fast bootload check to quickly determine if a power meter can accept firmware upgrades
* All CinQo references changed to simply read "power meter"
* Qalvin now checks the range of acceptable slopes based on power meter type and clamps the range to those values while warning the user
* Fixed the improper cast in Spider serial number issue #123
* Fixed the Cadence RPM drop to 0 issue #99
* Fixed the improper cast in power meter offset returned from ANT+ calibrate issue #98
* Power meter firmware files are now downloaded directly from Quarq and stored locally on the device
* Added custom ANT+ bursting code for consistent power meter firmware upgrades
* Added in legacy support for iOS 3.1.X series devices
* Table views are now larger on iPad devices
* Fixed the bootload hangup on iOS issue #91
* Fixed the empty Advanced Diagnostics issue #90
* Qalvin now uses the new cross platform CinQoSport library for all power meter ANT+ communication (this is a huge change)
* Qalvin now has the ability to bootload and update the firmware on supported power meters
* Qalvin now searches for power meters in bootload mode and, if found, sends them directly to the firmware update
* Calibration tables have been added for quickly recalibrating a power meter when you exchange chainrings 1.2.0 09/07/2012 - fixed dual broadcast mode
- added option to redo the final calibration step
- added an initial no-weight calibration step
- added additional calibration process warning
- updated calibration process help
- display chainring balance as a percentage in calibration results 1.1 07/05/2011 1.0 06/01/2011

version 1.9

posted on 2017-05-16

This app has been updated by Apple to display the Apple Watch app icon.

Updates for DZero power meters. Name changed to Qalvin Legacy.

version 1.9

posted on 2017-05-16

May 16, 2017 Version 1.9
This app has been updated by Apple to display the Apple Watch app icon.

Updates for DZero power meters. Name changed to Qalvin Legacy.

version 1.9

posted on 2017-05-16

May 16, 2017 Version 1.9
Updates for DZero power meters. Name changed to Qalvin Legacy.

version 1.9

posted on 2017-05-16

May 16, 2017 Version 1.9
This app has been updated by Apple to use the latest Apple signing certificate.

Updates for DZero power meters. Name changed to Qalvin Legacy.

version 1.6

posted on 2011-06-01

version 1.9

posted on 1970-01-01

2017年5月16日 Version 1.9
Updates for DZero power meters. Name changed to Qalvin Legacy.

version 1.9

posted on 1970-01-01

16 de may. de 2017 Version 1.9
Updates for DZero power meters. Name changed to Qalvin Legacy.

RELATED PROGRAMS

Our Recommendations

Publisher Description

About Qalvin Legacy

How to install Qalvin Legacy on your iOS device:

Program Details

General

Category

System requirements

Download information

Pricing

Version History

version 1.9

posted on 2026-10-13

version 1.9

posted on 2026-09-04

version 1.9

posted on 2026-08-22

version 1.9

posted on 2017-05-16

version 1.9

posted on 2017-05-16

version 1.9

posted on 2017-05-16

version 1.9

posted on 2017-05-16

version 1.6

posted on 2011-06-01

version 1.9

posted on 1970-01-01

version 1.9

posted on 1970-01-01

Qalvin BLE

Qalvin BLE 2.0.0

SRM PM9 1.2.1